Our fleet
Autopark "Agrologistics" has more than 50 specialised trucks of different capacity and European emission standard Euro-5 and Euro-6, also a third of our trucks are brand new. Our fleet is constantly increasing, updating and improving.

All the trucks are certified according to the European standards and requirements. Each car is under our ownership and as a result the transportation costs are always below the market price.

None
SCHMITZ
Type
Awning
Choose
Curtainsider Flatbeds are the most demanded type of trailers, due to their variation in loading and unloading, suitable for many types of goods. The standard semi-trailers are suitable for the transport of most goods, such as building materials, consumer goods (e.g. household chemical goods, clothing or shoes), packaged products (e.g. food preservation), equipment, furniture, household appliances, ADR dangerous loads, flooring, cables, paper, paint and varnish, electric motors, and a lot more.
Main characteristics
Load capacity
24 t
CMR-insurance provided
Can be fully un-tarpaulined
Maximum capacity
33 Euro pallets
Body width
from 2.45 m to 2.5 m
Full volume
from 80 m3 to 92 m3
The length of the body
13.6 m
Height
from 2.4 m to 2.75 m
None
Schmitz SKO 24/L - 13.4 FP
Type
Refrigerator semitrailer
Choose
Refrigerator - is a special type of trailer, used to transport products, which require specific transportation conditions. The inside is equipped with a special refrigeration unit that retains all the qualities of the load. Food, flowers, drugs with little shelf life, and many others.
Main characteristics
Body length
13.6 m
Height
from 2.4 m to 2.75 m
Body width
2.45 m to 2.5 m
Maximum capacity
33 Euro pallets
Sanitary passport provided
Temperature regime
from -29С of up to + 29С
Class C - FRC
CMR-insurance provided
Load capacity
to 22 tons
Full volume
from 80 m3 to 92 m3
None
FELDBINDER KIP 65.3
Type
Bulk tank
Choose
Silo semi-tanks are used for transportation of bulk freights. Transportations using silo trailers are the perfect way to transport goods that require specific conditions of uploading and unloading. Uploading process uses overhead hatches and unloading is performed in a tipper-like manner through the opening at the back or with the use of the compressor blowing through the discharge hose.
Main characteristics
Sanitary passport provided
Full volume
from 50 m3 to 65 m3
Number of sections
1
Load capacity
25 t
Hatch diameter
from 450 mm to 550 mm
CMR-insurance provided
Number of hatches for uploading
3 to 6
Unload type
from the back
Compressor cooling system provided
Hatch diameter for unloading
800 mm
None
MAGYAR
Type
The tank is liquid
Choose
Semi-liquid tank - a tank for transporting large volumes of liquids. Food tank is made of stainless steel and is designed to transport food, such as fruit concentrate, vegetable oil, dairy products, glycerol. And also there are the tank trucks intended for transportation of chemical liquids: technical oil, solutions of chemicals, etc.
Main characteristics
CMR-insurance provided
Full Volume
from 30 m3 to 45 m3
Pumps provided
The presence of steam shirts
Sanitary passport provided
Number of sections
from 1 to 3
Hatch diameter
from 450 mm to 550 mm
Unload type
from the back
Height
from 2.4 m to 2.75 m
Load capacity
24 t
None
MEGA MNW
Type
Tipper
Choose
The most common, specialised motor vehicle is a tipper. Tipping trailer and semi-trailer - specialise in transporting grains and oilseeds (wheat, corn, barley, oats, peas, etc.) and bulk materials (gravel, sand, stone, clay, soil, limestone and so on).
Main characteristics
Full volume
from 36 m3 to 60 m3
Height
from 1.6 m to 2 m
Load capacity
to 25 t
Body length
from 9 m to 12 m
Suitable for grain unloading
Can be covered with tarpauline
Body width
from 2.40 m to 2.50 m
Unload type
from the back

Transportation Calculator

Calculate the approximate cost of your transportation by choosing the type of trailer and filling out the form below.

1
Select Trailer Type
None
Flatbed Curtainsiders
None
Refrigerators
None
Silo Tankers
None
Food Tankers
None
Tippers
2
Fill the form
+ Add intermediate point
+ Add a point of discharge